When your Dish TV remote volume isn’t working, do not panic. Finding the actual reason why your Dish remote volume isn’t working is very important. Remember the first step to take in situations like this is to call the support team for guidance. Afterwards, you can research how to fix it in case you need another confirmation.
Reasons why your dish tv remote volume not working
Low batteries
This is an obvious reason why your remote volume might not work. It is advisable to check your remote battery now and then to avoid issues like this. To check if you do not have a low battery, press your Home button three times. It will then show you the level of your battery.
Broken remote or receiver
If your remote or receiver is broken, the volume signal will be affected in a way that it can not receive or send the signal properly. This is a rare case scenario but this can also be a cause for your remote volume not working.
Steps to fixing your dish TV remote volume
Restart the ServerCheck Remote SettingsUnpair and Repair the RemoteReprogram the RemoteContact Support TeamReplace your remote
Restart the Server:
Restarting the Server can help fix the issues with your remote volume. Make sure it is a safe process and do not press any button until it has restarted completely. Unplug the power cord and wait for 10 seconds before plugging it back. This should fix the issue with the remotes volume. If this does not work, however, you can try number 2.
Check Remote Settings:
Once in a while, changing the remote setting can cause your remote volume to start acting up. In such instances, you have to go through your remote settings in a detailed manner to ensure that everything is placed and fixed appropriately. Ensure that your remote is completely paired with the receiver in the remote settings.
Unpair and Repair Remote:
The issue with your remote volume can stem from the remote itself. Unpairing and Repairing your remote will automatically reset the settings of your remote and put everything back in its default stage. This will most likely fix the issue since the remote will be fixed to a stage where it is as good as new. To do this, press the front panel of your receiver and press system info then press the Unpair button and press ok. To repair, press the system info, then select the SAT button and press cancel. This will successfully repair the remote.
Reprogram the Remote:
Reprogramming the remote means programming it to your TV. You can control your TV with your remote this way. To do this, head on to your Home or Menu button, press the remote control and select the device you plan on pairing with, choose the right brand you are pairing with (you have to be careful with this stage to avoid error), select the pairing Wizards to test different codes. Follow the instructions to test each code and if you find the code that works, click select. The reprogramming is done!
Contact Support Team:
As we said earlier, contacting the support team is very critical especially if you just installed your Dish TV. If you have tried all these steps and your remote volume is not working, you need to contact the support team. When you tell them about the problem you have with your remote volume, there is a high chance that the Support Team will send a technician to assist you.
Replace the Remote:
If you have tried every step and your remote volume is not working, the best advice is to change your remote. You can change your remote to a Universal remote since they even offer more benefits than a Dish remote offers.
Once you have ensured you are using the right remote, try to troubleshoot or contact the support team. If all these steps do not work, it is best to change your remote with something more efficient to avoid these problems.
How do I reset my remote control?
Disconnect from the plug and leave it for 10 seconds or more then connect it again.
Can I change my batteries anytime it is low?
Yes, you can. Ensure you buy brand new batteries and you are good to go!
Is it advisable to purchase a different remote from the Dish TV Remote?
Yes, it is a good idea. A universal remote gives you more liberty to control your receiver and TV than a Dish TV Remote.
