How Do I Make My Dish Remote Work?

Below are well-selected active steps to take when your dish TV remote is not working. Note that the reset process can take up to 5 minutes to complete.

A major place to start is by unplugging the power cord of the dish receiver from the electrical outlet and plugging it back after like 10 seconds. You can also remove the battery and fix it back, or you can clean the battery terminals. Other measures include pressing the start button, again and again, pairing the remote, restarting your receiver and then resetting your receiver if none of the aforementioned work.

A Brief Awareness

The first thing to note is that if your dish remote is not programmed in the correct way to the receiver, it will not work for it. So, you may have to check and be sure about this before looking for ways to fix it. If the remote is still not working after that, then you can patiently take the actions provided in this article to help you.

When Dish Remote Is Not Working Even With New Batteries

The major reason you will experience this could be because the terminals of the remote control are dirty. So, after inserting a new battery and your remote is still not working, you might want to remove the battery and clean the terminals by using a soft cloth or cotton but with a little portion of alcohol solution. Ensure you clean thoroughly and then replace the former batteries there with new ones.

When Dish TV Remote Control Is Not Working Or Not Responding Properly:

A quick one will be to remove the battery and then go through the troubleshooting guide completely until you’ve seen what could be wrong with it.

How To Fix A Remote That Is Not Working In A Short Time?

Ensure that the remote is rightly fixed to control your TV before you consider the below.

Remove Or Swap Batteries

Another reason that can make your remote not respond may depend on which model it was at the time you were trying to operate it. For example, your remote will not work for your TV if it’s in Aux until you change it to your TV or receiver mode.

Pair The Remote

Sometimes, your remote will not work if it has lost pairing with your TV. So, you will just have to ensure the pairing is reinstated one more time. Check the manual for a guide on how to pair your TV with the remote if yours can’t pair automatically.

Restart Your Receiver

If you pair your remote, and it still did not work for you, re-starting your receiver can be a game-changer. Here’s how to restart your receiver. Read the manual on how can restart your receiver, and set your dish receiver with a code. Most times weak batteries can be the cause of this experience, so you are advised to get batteries that are not rechargeable. This is because rechargeable batteries get weakened, and their capacity reduces the more they are charged.

Reset Your Receiver

If after restarting your receiver and the problem persists, resetting your receiver might be the only option left at this moment. Before this action, bear in mind that changes will be made to all settings you’ve done on the receiver and your channels in the past, and a factory reset will bring your receiver to a brand-new state just like when you just bought it. If you are looking for steps to follow to achieve that the below will put you through:

•Go to the menu key or the home key and press it twice or thrice.

•Go to Receiver and check for Tools.

•Click on the Tools button

•Select the Reset To Factory Defaults button to reset to factory defaults

•Make a Confirmation of the prompt that comes up.

•Lastly, Wait for the receiver to restart.

Conclusion

This article gives a concise explanation of all the active measures to take in ensuring the remote of your Dish TV work again. In circumstances where all the above have been carried out and there is still no change, you may need to contact your distributor or get another dish remote.

Can I Use My Phone As The Remote For My Dish?

This is very possible. If you have a dish receiver that is connected to the Internet, then you can just go ahead to download the Dish anywhere App on your phone and then set it as your TV remote.

How Do I Reset My Dish TV Remote?

If having checked properly that everything is programmed rightly and plugged in and the problem persists, ensure to press the start button again and again where you’ll see information about the system and the button, press it.