The question is, what should you do when your dish receiver can’t start? Run to the internet for a quick fix? Check youtube for solutions? Well, perhaps, you can as well use this article to solve your puzzle. Below are summarized tips to follow when your dish receiver is stuck at starting up.
What Makes A Dish Receiver Restrain From Starting Up?
Several factors contribute to a dish receiver failing to start up. At times it may be power issues or high temperatures that make a dish receiver unable to start up. Other times it may be due to a bad wide area network connection, overheating, poor power flow, or auto-update. These potential factors may make a dish receiver not start up as usual.
However, sometimes you may miss the real issue, which is bound to happen. When you can’t figure out the problem, reach out to your service provider for a solution.
Methods You Can Use To Fix A Dish Receiver That won’t Start
When your dish receiver gets stuck on starting up, you can use the listed methods below to solve the issue.
Try To Reset The Dish Reciever
This is one of the methods you can use to solve your problem. Resetting your dish receiver is simply troubleshooting all the issues the dish has. However, ensure you know the model of your dish to have an easy time locating the rest button.
If you can’t find the reset button, google on the internet your dish model and check where the reset button is located. Once you have identified where the reset button is, press it and hold the button for roughly three seconds until the dish receiver reboots. Check if the dish receiver is still stuck after rebooting and restarting.
Check If You Have Enabled Auto Update On Your Dish Receiver
With auto-update enabled, your dish receiver may fail to start up for a while until the updates are installed. If the auto-update is on, then the dish receiver will autoboot and update after every seventy-two hours.
If that’s the case, you must ensure that your device is not installing updates or managing any system components because this may hinder the dish from starting. When your device is installing updates, the dish remains unresponsive to inputs, thus making it stuck at starting up.
Perform A Power Cycle On Your Dish Reciever
This is an alternative method in case resetting your device does not work. If you try resetting your dish receiver and it still doesn’t function as expected, you can try performing a power cycle on the device. A power cycle helps troubleshoot device malfunctions and solve issues within your dish receiver.
To perform a power cycle, you have to follow some basic steps. They are as outlined:
Ensure you first turn off your device before doing anything else. Once you have turned off the device, unplug it. Give it a period of three to five minutes right after unplugging. After three to five minutes, plug the device back into the power source. Check to confirm if your dish receiver is working.
Check If you Have Proper Ventilation And If Your Dish Is Clean
If the power cycle does not work, you should check if you have proper ventilation for your dish to work correctly. Cleaning your dish is also another thing you should consider doing. A dish receiver may be stuck on starting up due to poor ventilation. If the device overheats and, let’s say, you have no proper ventilation, that causes damage to the device.
To avoid your device overheating, ensure you avoid enclosed environments that have no ventilation. Keep your dish in a very open and free environment to prevent overheating. Additionally, ensure you clean your device for proper functioning.
Check The Wide Area Network connection
Your dish receiver may be stuck on starting up because of an issue with the WAN connection. If the Wireless Joey Access Point is not directly connected to the ethernet port, that affects your dish receiver. Therefore it is essential to check if the WJAP is connected to the Hopper3 ethernet port.
Conclusion
Whenever you experience your dish receiver failing to start up, follow these methods to fix your issue quickly and effortlessly. You can troubleshoot the device or perform a power cycle to enable your dish receiver to function correctly.
What happens if I don’t wait for some minutes after unplugging my device from the power outlet?
Failure to wait for at least five minutes may lead to the problem not being solved.
Why is my dish receiver not starting up?
It may be because you’ve enabled auto-update, the dish is placed in a poorly ventilated area, and there’s poor power flow or overheating.
